To introduce the motorcycle brake pad selection matters needing attention

The application of motorcycle brake pads has the advantages of long life and ability to balance the braking distance, but there are many types of friction pads, different friction pads, and different product brands. Now, the motorcycle brake pad editor will introduce several methods to choose the quality of brake pads.

Pure motorcycle brake pads have a smooth and clean surface. They look like good materials, not too hard or too soft, can balance the braking distance, and have the advantages of long life. Because the quality of the brake pads is mainly determined by the material used, it is difficult to distinguish the pros and cons with the naked eye, and many people are often deceived. Identification of brake pads requires professional knowledge and skills, but can identify the authenticity of motorcycle brake pads. Next, we will detail the important divisions.

1. Look at the packaging. Factory parts packaging is generally very standardized, unified standard specifications, printing clear and formal, fake and inferior product packaging printing is relatively rough, it is easy to find defects from the packaging.

2. Look at the color. The surface of some factory accessories is assigned a color. If other colors are found, it is a fake inferior part.

3. Look at the appearance. The printed or cast characters and marks on the appearance of factory accessories are clear and regular.

4. Look at the paint. Unscrupulous businessmen carry out simple processing of waste parts and components, sell them as qualified products, and illegally seek high profits.

5. Look at the fabric. The materials of the factory parts are qualified according to the design requirements, and the inferior products are mostly replaced by cheap inferior products.

6. Observe the process. The appearance of inferior products is sometimes very good, but due to poor manufacturing processes, cracks, sand holes, slag, burrs or dents are prone to occur.

7. See Preservation. If the brake pads have problems such as drying, oxidation, discoloration, and aging, it may be due to poor storage environment, long storage time, and poor materials.

8. Look at the junction. If the rivets of the brake pads are loose, degummed, the solder of the electrical parts joints, and the seams of the filter elements fall off, they cannot be used.

9. Look at the display. Some regular parts have some kind of symbol, pay attention to the identification of the production license on the packaging, and specify the representation of the coefficient of friction. It is difficult to guarantee the quality of products without these two logos.

10. Look at the leak. The normal component parts must be complete to ensure smooth installation and normal operation. Some component parts have individual small parts leaking, usually "water products", which makes installation difficult. Due to the lack of individual small objects, the entire assembly part is often discarded.

Well, today's introduction to motorcycle brake pads is here. I hope you will seriously choose not to be deceived. I wish you good health and all the best!